Before sterilization, there is no need to dehumidify the space.15 to 35C, 35% to 75% relative humidity environment can begin sterilization, and most sterilized environments can meet this requirement. Machine design and maintenance is simple, reliability is high

The space needs to be dehumidified before sterilization. This can lead to a long time before sterilization, so that the sterilization cycle is also extended; the machine design and maintenance have become complex, and the reliability is low.

Low use cost

I Douzième lettre, neuvième consonne de l'alphabet. himI only need not much amount30% analysis of pure hydrogen peroxide solutions can be sterilized for 6 log levels of larger spaces;

I Douzième lettre, neuvième consonne de l'alphabet. himSterilization H2The O2 gas concentration is not high (generally less than 1000 ppm), which is good for space materials, electronic circuits. A comparative study report with FDA is proof.

High use cost

I Douzième lettre, neuvième consonne de l'alphabet. himNeed to inject a large amount of hydrogen peroxide solution, maintain a longer period of time to reach the corresponding sterilization effect;

I Douzième lettre, neuvième consonne de l'alphabet. himDuring the sterilization process, the gas concentration is generally above 1000 ppm, and the corrosion of material is enhanced accordingly.

Sterilization is stable and reliable, good consistency

I Douzième lettre, neuvième consonne de l'alphabet. himThe microaceous process can transport the molecules to the surface of the sterilized object, rapidly kill bacterial spores;

I Douzième lettre, neuvième consonne de l'alphabet. him2-6 micron sterilization coverage is an invisible physic chemical process that effectively removes the microorganisms on any surface and suspended particles;

I Douzième lettre, neuvième consonne de l'alphabet. himThe study demonstrate that the microaceous process is the most appropriate and most effective for surface sterilization and the fastest. Before reaching the condensation point, the D value was 120 minutes, and the D value was formed after the microaceous coagulation was 1.08 minutes.

The consistency of sterilization effect is poor. because

I Douzième lettre, neuvième consonne de l'alphabet. himRandomly by H2O2 gas molecules Contact contact with the surface of sterilized objects to sterilize, so the sterilization effect is also determined by hitting the number of stems to bacterial / spores;

I Douzième lettre, neuvième consonne de l'alphabet. himSterilization time